Training: Completely Removing SCBA to Navigate Obstacles – Safely remove and reassemble SCBA, navigate obstacles, and enhance self-rescue skills for emergencies.

This training focuses on teaching participants how to safely remove their SCBA (Self-Contained Breathing Apparatus) entirely, navigate obstacles, and reassemble the equipment afterward. It is designed to improve skills for confined spaces or complex environments.

Training Overview

• Duration: 15 minutes
• Participants: 1 person
• Required Equipment:
  • Full personal protective equipment (PPE)
  • SCBA
  • Personal hand tools
  • Obstacles (props or furniture)

Preparation

1. Ensure the training area is hazard-free.

Pre-training Instructions

1. Clarify Expected Outcomes
   • Explain the purpose and goals of the training.
2. Review Safety Guidelines
   • Share safety precautions and confirm participants understand them.
3. Explain the Course
   • Indicate the starting and ending points and describe the flow of the training, including obstacle placement.
4. Increase Scenario Complexity
   • Simulate reduced or no visibility to raise difficulty.
5. Check PPE
   • Ensure participants are fully equipped with appropriate PPE.
6. Final Safety Check
   • Conduct a final inspection before starting the exercise.

Key Training Points

1. Learn how to safely and efficiently remove the SCBA completely.
2. Develop techniques for navigating obstacles while holding the SCBA securely.
3. Practice reassembling the SCBA and verifying its functionality.

This training enhances self-rescue skills, ensuring participants can manage SCBA equipment effectively during emergencies. Always prioritize safety and follow instructor guidance.

Training Steps

Step 1: Initiate a MAYDAY Call

• If an emergency arises, immediately call for help by issuing a MAYDAY.

Step 2: Basic Preparations

• Check Air Supply: Verify remaining air to avoid waste.
• Turn On Flashlights: Improve visibility.
• Make Noise: Signal your location to others.
• Locate Exits: Identify escape routes.

Step 3: Adjust Equipment

• Unfasten Chest Straps.
• Loosen Shoulder Straps on both sides.
• Secure Regulator and Mask: Hold the regulator hose and straps firmly to protect critical parts.
• Loosen Waist Straps and remove if needed.

Step 4: Remove the SCBA

• Unfasten One Shoulder Strap: Start with the non-regulator side.
• Rotate the cylinder forward and remove the other shoulder strap.
• Keep a firm grip on the regulator straps at all times.

Step 5: Navigate the Obstacle

• Push the SCBA ahead of your body while passing through the space or obstacle.

Step 6: Reassemble the SCBA

• Place the SCBA back into position and start by securing the regulator strap.
• Adjust all straps, ensuring the SCBA is correctly and securely fastened.

Key Takeaways

This training aims to help participants stay calm and effectively manage SCBA equipment in emergencies. Step-by-step execution and regular practice build confidence and skills for real-life scenarios. Always prioritize safety and adhere to the instructor’s guidance.

Reference page: This training focuses on teaching firefighters to safely navigate wire entanglements and remove SCBA in emergency situations, ensuring effective response during critical scenarios.

References　National Fire Protection Association (NFPA)

Related posts:

Fundamentals of Vehicle Stabilization SCBA Troubleshooting Training MAYDAY Call Training Training: Removing SCBA Partially to Navigate Obstacles Training: Converting SCBA for Rescue Use Training: Avoiding Wires and SCBA Removal Techniques Window Hang Training Basic Knowledge for Door Forcible Entry: A Guide for Firefighters Search and Rescue Manual Part 2 Mayday Calls: Understanding and Training for Emergency Situations Ladder Escape – Hook 2 / Slide to 4 Training Ladder Escape – Head First